BVLGG - HOUGHTO-QUENCH G

  • MSDS: BVLGG
  • Manufacturer: E F HOUGHTON AND CO
  • Product Name: HOUGHTO-QUENCH G
  • National Stock Number: 9150-00N051713
Product Identification

Product ID:HOUGHTO-QUENCH G
MSDS Date:11/08/1990
FSC:9150
NIIN:00N051713
MSDS Number: BVLGG

Responsible Party
E F HOUGHTON & CO
VALLEY FORGE, PA 19482
US

Emergency Phone: 215-666-4105

Info Phone: 215-666-4105

Preparer: ROBERT E. WILLIAMS

Cage: 73227

Contractor
HOUGHTON INTERNATIONAL INC
930 VALLEY FORGE, PA 19482-0930 US

Telephone: 610-666-4105

Cage: 73277

Ingredients

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL: AVOID BREATHING PRODUCT
MISTS. BREATHING MISTS IN EXCESS OF THE TLV MAY CAUSE IRRITATION OF
UPPER RESPIRATORY TRACT. SKIN:MAY BE A MILD IRRITANT TO SKIN ON
PROLONGED CONTACT. EYE:MILD IRR ITANT. INGEST:NO KNOWN SIGNIFICANT
EFFECTS. CHRONIC: (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:UNKNOWN FOR THIS PRODUCT.
Medical Cond Aggravated by Exposure:PERSONS WITH CHRONIC RESPIRATORY
DISEASE MAY SHOW INCREASED SYMPTOMS DUE TO IRRITATION.

First Aid

First Aid:INHAL:REMOVE TO SOURCE OF FRESH AIR. SKIN:WASH WITH SOAP AND
WATER. EYE:FLUSH WITH WATER FOR AT LEAST 15 MINUTES, CONSULT
PHYSICIAN. INGEST:DO NOT INDUCE VOMITING, CONSULT PHYSICIAN.
PRODUCT IS MAINLY MINERAL OIL.

Fire Fighting

Flash Point Method:COC
Flash Point:355F,179C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . TREAT AS AN OIL FIRE.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:CLEAN UP SMALL AMOUNTS WITH DRY ABSORBENT
MATERIAL. FOR LARGER AMOUNTS, DIKE TO CONTAIN AND EITHER REUSE OR
DISPOSE OF, DEPENDING ON CONDITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTACT WITH STRONG OXIDIZERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . REQUIRED ONLY IF TLV IS EXCEEDED AS OIL MIST.
Ventilation:LOCAL EXHAUST IF MISTING; MECHANICAL TYPE FOR NORMAL
CONDITIONS.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS.
Other Protective Equipment:NOT REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:600F,316C
Vapor Pres:NIL
Vapor Density:>AIR
Spec Gravity:0.88
Evaporation Rate & Reference:NIL
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK GREENISH-AMBER LIQUID, OILY ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL; OXIDES OF CARBON

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS . FOLLOW REGS FOR DISPOSAL OF WASTE OIL. CAN BE
INCINERATED UNDER CONTROLLED CONDITIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.